Conditions

Wednesday, February 16, 2022

Flex-6400 issues, end of K3Y, 2xQRP award, and more!!


Flex-6400:

Well, my brand new 6400 died less then a month after I received it. The problem seems to be that the audio, spectrum and waterfall data was not being sent by the radio all the time. There would be times it would start working for about 10-15 seconds and then just stop. 

However, the command interface seem to work fine. Also it was still able to transmit.

I was communicating with an apps person for awhile. Since nothing he suggested worked, I got a phone call from Dan Quigley, N7HQ, the support director, who connect to my Flex via TeamViewer and determined there was nothing else that could be done remotely. Dan started the process of having Flex build me another 6400 to be shipped to me before I had to send the broken radio back.

This whole process took about 12 days. I have the new 6400 running now. Hope I have better luck with it.

I discovered there is a bug in the CW mode. If you set the the delay in the P/CW window to certain values, it will randomly stop transmitting. But it does recover, so you only lose a little. This seems to be a know bug and if I set the delay to a small value it does not happen.

Flex-6400 number 1


K3Y event:

January was the SKCC anniversary event. It lasted from Jan 2nd to the 31st.  This is the second year in a row that I was able to complete the grand sweep.

I worked 86 out of 174 band slots, 110 K3Y operators worked, 12 DX Entities out of 17 worked, 5 Canadian Prov/Terr of possible 6 and 42 states worked. 

All in all a good result. Not bad considering I worked the last 11 days with no WARC bands.

My band slot results for the 2022 K3Y Event.



2xQRP award:

This award I am very proud of. It took me sometime to get, but it was worth it.





Operating:

I ended up with 147 brags for January. Might be my best brag total ever.
I had 47 QSO in the January WES. I have not been as active in the WES lately. Hope to change that in the future. 

February's WES I did a little better, 70 QSOs. All were S&P, no CQing this WES.

Bands seem to be opening up. I have had a lot more 12 and 10M QSO lately. Come on Cycle 25!!!

Repair of DG-5:

Well I finally seem to have fixed all the problems with the DG-5 Digital Display for my TS-520S. I had to replace a 7454 IC that had a bad input. I also re-soldered all the through holes and ran a piece of copper wire through each. Hopefully this is the end of it!


before: The digit third from left should be a "0"

After Third digit is now a "0"

Well, I guess I will end this here. CUL es 73







3 comments:

  1. Great blog Dave, thanks for posting it. Sorry to see the problems you had with the Flex, so looks like the company took care of it for you.
    Curt K2CWM

    ReplyDelete
    Replies
    1. Thanks as always Curt. The new 6400 seem to be doing fine, but I will have to give it a couple of months to make sure

      Delete
    2. OK Dave, good luck with the new 6400.

      Delete